Halloween Tableware

Halloween Tableware
Sort By:

Tombstone Favor Boxes
Code: 29692

$3.49 / 3 per pack

The Tsurumi NK2-15 Heavy duty, high head single-phase pump voltage reconnect allows for change from 110 volt to 220 volt. This contractors pump is for high volume single phase dewatering applications. It has double inside mechanical seals with silicon carbide faces, running in an oil filled chamber and further protected by a lip seal running against a replaceable, stainless steel shaft sleeve provides for the most durable seal design available.

Tsurumi Model No. NK2-15

  • Terminal board for voltage reconnect allows for change from 110V to 220V
  • 32' Power cord
  • Continuous Running Water Level: 3-1/4"
  • Built in thermal & amperage sensing protector prevents motor failure due to overloading or accidental run dry conditions
  • Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours extend operational life
  • V-Ring Seal design protects mechanical seal from abrasive particles
  • Semi-vortex, solids handling impeller
  • Max. Dia. Solids 5/16"

Applications

  • Residential, commercial, industrial wastewater and construction site drainage
  • Effluent transfer
  • Decorative waterfalls and fountains
  • Raw water supply from rivers or lakes.
  • Nonflammable Liquids Only

 

GENERAL DATA
MAX. FLOW: GPH 6,600 GPH/110 GPM
MAX. HEAD: ft 65'
PUMP TYPE Elec. Submersible, Top Discharge
DISCHARGE CONNECTION 3" NPT
SHIPPING WEIGHT : lbs 64
DEMENSIONS Diameter 9 7/16" Height 24 1/2"

ELECTRICAL/MOTOR DATA
MOTOR RATING: HP
2
MOTOR AMPS
23.0 at 110 volt / 11.5 at 220 volt
VOLTAGE
110 or 220 volt 60Hz
MOTOR RPM
3440
MOTOR PROTECTION
Thermal Automatic
POWER CORD: GAGE; LENGTH
12/3; 32'
MAXIMUM LIQUID TEMPERATURE
104 F

The Tsurumi NK2-15 Heavy duty, high head single-phase pump voltage reconnect allows for change from 110 volt to 220 volt. This contractors pump is for high volume single phase dewatering applications. It has double inside mechanical seals with silicon carbide faces, running in an oil filled chamber and further protected by a lip seal running against a replaceable, stainless steel shaft sleeve provides for the most durable seal design available.

Tsurumi Model No. NK2-15

  • Terminal board for voltage reconnect allows for change from 110V to 220V
  • 32' Power cord
  • Continuous Running Water Level: 3-1/4"
  • Built in thermal & amperage sensing protector prevents motor failure due to overloading or accidental run dry conditions
  • Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours extend operational life
  • V-Ring Seal design protects mechanical seal from abrasive particles
  • Semi-vortex, solids handling impeller
  • Max. Dia. Solids 5/16"

Applications

  • Residential, commercial, industrial wastewater and construction site drainage
  • Effluent transfer
  • Decorative waterfalls and fountains
  • Raw water supply from rivers or lakes.
  • Nonflammable Liquids Only

 

GENERAL DATA
MAX. FLOW: GPH 6,600 GPH/110 GPM
MAX. HEAD: ft 65'
PUMP TYPE Elec. Submersible, Top Discharge
DISCHARGE CONNECTION 3" NPT
SHIPPING WEIGHT : lbs 64
DEMENSIONS Diameter 9 7/16" Height 24 1/2"

ELECTRICAL/MOTOR DATA
MOTOR RATING: HP
2
MOTOR AMPS
23.0 at 110 volt / 11.5 at 220 volt
VOLTAGE
110 or 220 volt 60Hz
MOTOR RPM
3440
MOTOR PROTECTION
Thermal Automatic
POWER CORD: GAGE; LENGTH
12/3; 32'
MAXIMUM LIQUID TEMPERATURE
104 F